PDA

View Full Version : I need a SS Bleeder Screw.........


MAV
10-14-2003, 16:55
for my stock fuel filter head. The stock plastic one has about had it. Who has them and accepts PayPal or CC ?
Kennedy
10-14-2003, 17:16
Greg @ Lube Specialist has them.


Myself, I see no need. 1/2" nut driver and gentle tightening, and no problems...
dmaxalliTech
10-14-2003, 17:39
Ditto with Greg, and with Kennedy, Once you get it broken free the initial time, just besure to use the correct size screwdriver. Mav, if I knew you needed one this weekend, I have a few spares laying around..
Lone Eagle
10-14-2003, 17:40
Dito what John said. Later! Frank
Modified
10-16-2003, 16:54
I have OEM plastic spares also. Didn't need them yet. Ordered them from Diesel Injection Service for a few bucks each. I could easily send one. If you were in a bind, I could drive the 100 miles and hand deliver, ................... of course for a cold one.
Kennedy
10-16-2003, 16:58
Or just come to the Dyno deal Saturday in MN!
MAV
10-16-2003, 17:56
Johnny!....If you got some SS bleeders, bring them on Sat.

Otherwise....Modified, I'll be in Green Bay on Sunday if your close buy there. I could get one from you then. Send me an email with your phone number if you want.
Kennedy
10-17-2003, 14:40
I don't have any, I was hoping to get Modified to come over to MN...
Modified
10-17-2003, 22:53
John : Sorry, I can't make MN. Two weekends in a row would have been WAY too much fun.
MAV : Sent you a E-mail. I should be able to meet ya in GB Sunday, if that still works for you. Call me.
MAV
10-19-2003, 16:24
Modified,
Thanks for the replacement bleeder screw today.
Did talk to John breifly today and a dyno day is projected for the near future. :D