Hi all, Im swaping out the NP 205 to a 208 on my M1031 so I can install a newly rebuilt 700R4. I don't want to tear down two transmissions to swap the Advance Adapter 32 spline output shaft from the old trans to the rebuilt one to bolt up the 205. Will I be able to retain the 205 shift linkage? There is no provision for the linkage pivot on the 700R4 to NP208 adapter/trans mount. Does this sound crazy, or should I swap the 32 spline shaft and stay with the far superior and bullet proof 205? My only other option is to put a far superior/bullet proof TH400 back in the truck, but to do that and be able to run this truck at highway speeds I would have to lift it 6in and run 37in tires. I hate the 700, My Banks 6.2 is killing these transmissions.