Hi Carl
I haven't tried an 07 type wheel on a ford, but the ford wheels used to have the biggest center hole.
The ford wheels fit over the gm hubs no problem.
I have an 04 HD GMC and have ford wheels on my winter tires because the tires and wheels came off a 99 ford. I had to take an angle grinder to the corners of the calipers to keep them from rubbing.Not much must took the corners down.
You can take a grinder to the center hole and open it up a bit.
In the old days i saw a lot of holes opened up with a cutting torch around here.
If you go with aftermarket wheels they will all fit.
90 Chev 3500 c/c 4x4,6.2na,400 auto,4:10 gears.DSG Timing gears,main girdle, isspro tach, pyro,boost,oil and trany temp.Dual Tstats, High volume peninsular pump,on shelf, Custom turbo and intercooler 85%complete. Change of plans for the dually, it's going to get a Cummins. Both trucks are Blue 90 4x4 crews
Reply With Quote
