AMG/GEP 506 Navistar Longblock ID

[Robyn]

P400 was the model designation for the AMG 6.5 that had been refitted with the complete lower cast iron girdle assembly.

Take a couple pix of the engine and post here.

Get a good side shot showing the pan rail area, as this is where the difference is.

Robyn

[More Power]

P400 was the model designation for the AMG 6.5 that had been refitted with the complete lower cast iron girdle assembly.

Take a couple pix of the engine and post here.

Get a good side shot showing the pan rail area, as this is where the difference is.

Robyn

If it doesn't have the cast-iron girdle, it's NOT a P400.

[okadoc]

If it doesn't have the cast-iron girdle, it's NOT a P400.

A pic of the valley with 506

[More Power]

That does look like a P400... likely a drop-in for a HMMWV.

The heads may have the vertical mounting flanges for the HMMWV intake manifold, which won't work for a pickup truck/Suburban intake. If you can use the rear mounted turbo, you're golden.

Thanks for posting the pic.

Jim

[okadoc]

P400 was the model designation for the AMG 6.5 that had been refitted with the complete lower cast iron girdle assembly.

Take a couple pix of the engine and post here.

Get a good side shot showing the pan rail area, as this is where the difference is.

Robyn

Thanks heaps for your reply hope I get this right first time here's the pics