Single Mass Flywheel for 6.2L/6.5L Diesel
I've been corresponding with a 6.2L diesel owner over a couple of weeks about the flywheel situation for the manual transmissions. Here is his most recent message, which I thought might help any others who may need these parts.
Jim
Quote:
Hello, Jim.
Thought I would follow up with you on the solid mass flywheel on a 6.2 Diesel.
I finally contacted a vendor who really knows his stuff. Knows about the GM service Bulletins on them etc.
I talked to Lou at Phoenix Friction in New Jersey. They have a kit for the job with flywheel, clutch, bearing and bolts for $500 including shipping. I will update you on how well it works when the job is finished. Blessings.
Al Peterson
Web page: https://www.phoenixfriction.com/p-23224-04-163ck-solid-flywheel-conversion-clutch-kit-gm-65l-diesel-pickups-suvs-12-in.aspx
Followup from Al - Oct 2, 2023
Followup from Al --
Quote:
Hi, Jim.
I realized that I never updated you on the flywheel replacement.
I had a local shop do the job for me since with my medical issues crawling under vehicles without a lift is no fun at all.
He also replace the rear main seal. It took a long time for him to get it done but I was not in huge rush. No issues just not a priority for him.
I got it back and took it for a drive. It seems to me to be smoother than it ever was before when releasing the clutch. It always seemed a bit grabby to me with the dual mass flywheel.
So,I would recommend this kit from Phoenix Friction. I think all in it cost me about $1400 Canadian.
Have a great weekend.
Al